My name is Garth Dexter with Planet Products Corporation. We have a line of radial ball piston motors that has very specific & limited applications, and has not been supported as well as it should have over the past several years. We are looking for someone to evaluate our hydraulic product offerings and determine if changes or new designs are necessary to solve problems currently in the marketplace.

This would be a contract/ consulation position with technical & market knowledge. Please contact me if you are interested in this opportunity.


Regards,

Garth Dexter, VP/ General Manager
Planet Products Corporation
gdexter@planet-products.com

(513)984-5544

Garth
I forwarded your request to a couple of persons I know who do consulting on Fluid Power equipment. Let me know if you don't hear from them and I can possibly give you other names.

Just to let you know you are not being ignored.

Bud,

I received a couple emails this morning, and am looking forward to moving forward on this project.

Thanks for your help.

Garth

Is your motor design similar to this manufacturers offering?
http://hydraulics.eaton.com/pr...trans_light_duty.htm

It is similar, but our line is on the small side. We have displacements from .1 to .94 cubic inches. Applications are for hydraulic servos, with excellent low speed smoothness and positioning.

Not trying to spam the board, but here is a link to some motor information:

http://planetproducts.thomasne...ors?&forward=1

Garth,

Would you like to know more about ways that Hydraulics & Pneumatics magazine can help you to market your products?