Kawasaki K3V. Cutaway shows one of two spools that is in each controller. Connecting link engages control arm. Most common problems: Swashplate-craddle wear, Barrel and shaft spline wear, worn seal area at control pison plugs, broken check ball retainers in the inlet/outlet section.
I thought it was bent axis that you were interested in?
Originally posted by Doug Hanson: Kawasaki K3V. Cutaway shows one of two spools that is in each controller. Connecting link engages control arm. Most common problems: Swashplate-craddle wear, Barrel and shaft spline wear, worn seal area at control pison plugs, broken check ball retainers in the inlet/outlet section.
I thought it was bent axis that you were interested in?
thnks for your attention
and i am not only intersted in bent axis pump but also all heavy equipment components
Fluid Power Forums 
